靜态磁参数测量实验平台的研制本科毕业专业论文.docVIP

本科毕业设计 静态磁参数测量实验平台的研制 毕业论文（设计）原创性声明 本人所呈交的毕业论文（设计）是我在导师的指导下进行的研究工作及取得的研究成果。据我所知，除文中已经注明引用的内容外，本论文（设计）不包含其他个人已经发表或撰写过的研究成果。对本论文（设计）的研究做出重要贡献的个人和集体，均已在文中作了明确说明并表示谢意。 作者签名： 日期： 毕业论文（设计）授权使用说明 本论文（设计）作者完全了解**学院有关保留、使用毕业论文（设计）的规定，学校有权保留论文（设计）并向相关部门送交论文（设计）的电子版和纸质版。有权将论文（设计）用于非赢利目的的少量复制并允许论文（设计）进入学校图书馆被查阅。学校可以公布论文（设计）的全部或部分内容。必威体育官网网址的论文（设计）在解密后适用本规定。 ? 作者签名： 指导教师签名： 日期： 日期： 摘 要 磁性材料广泛应用磁特性是影响其性能的关键因素。磁材料有的实用价值。。 在软件设计中，采用C语言和汇编语言混合编程，设计测量过程中数据的采集、处理、存储和测量结果显示。设计关键词磁性材料，Title: The development of static magnetic measurement system Applicant: Speciality: ABSTRACT Magnetic materials are widely used in many areas, such as national defense, industry, agriculture, medical and daily life. The parameters of magnetic characteristic play an important role in products’ performances. For laboratory construction, this paper develops a static magnetic parameter manual measurement of soft magnetic materials system. “MCS-51 SCM” system is the core of the hardware. A magnetic circuit is designed and the magnetic current is given by nine series fixed resistances controlled by the switch and constant voltage source; In the testing of the sub-circuit design, induction EMF is transferred into SCM after wave transform, absolute strike and A/D conversion. The magnetic induction intensity B can then be obtained by calculation. In the software design, both C and assembly language are applied to design the procedure module of data collection, procession, storage and test result display. Modular programming entrusts the design the features of strong readability, easy maintaining and convenience upgrading. The developed prototype was tested in the laboratory. Results show that targets of this static magnetic measurement are achieved. The demand for education purpose is also met. KEY WORDS: Magnetic material，Magnetization curve，Hysteresis loop， MCS-51 SCM