实验七：默认路由的配置（附件）.docVIP

实验报告书 课程名称 计算机网络技术与应用 实验题目 实验七：默认路由的配置 专业班级 2010级信息管理与信息系统2班 学 号 37号 姓 名 肖丹妮 指导教师 赵圆圆老师 计算机科学与技术专业教研室 2011年月r1的配置： Press Enter to Start RouterRouterenRouter#conf tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#hostname router1router1(config)#interface e0router1(config-if)#ip address 192.168.1.2 255.255.255.0router1(config-if)#no shut%LINK-3-UPDOWN: Interface Ethernet0, changed state to uprouter1(config-if)#interface s0router1(config-if)#ip address 192.168.2.1 255.255.255.0router1(config-if)#clock rate 6400router1(config-if)#no shut%LINK-3-UPDOWN: Interface Serial0, changed state to uprouter1(config-if)#exit%LINK-3-UPDOWN: Interface Serial0, changed state to down%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to downrouter1(config)#ip route 0.0.0.0 0.0.0.0 192.168.2.1router1(config)#ip classless^% Invalid input detected at ^ marker. //可能是路由器型号太低或者是模拟软件的bug，ip classless无效 router1(config-if)#exitrouter1(config)#exitrouter1#copy running startupDestination filename [startup-config]?Building configuration...[OK] %LINK-3-UPDOWN: Interface Serial0, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to up r2 的配置： Press Enter to Start RouterenRouter#conf tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#interface s0Router(config-if)#ip address 192.168.2.2 255.255.255.0Router(config-if)#no shut%LINK-3-UPDOWN: Interface Serial0, changed state to upRouter(config-if)#interface e0Router(config-if)#ip address 192.168.3.1 255.255.255.0Router(config-if)#no shut%LINK-3-UPDOWN: Interface Ethernet0, changed state to upRouter(config-if)#exitRouter(config)#ip route 0.0.0.0 0.0.0.0 192.168.2.2Router(config)#exitRouter#copy running startupDestination filename [startup-config]?Building config