D2D虚拟带库安装使用指南解读.doc

HP StorageWorks D2D Backup System nlHP D2D4004 Using the console to edit the HP D2D Backup System network (IPv4 and IPv6) To connect the system console 1. Connect the monitor cable to the VGA port on the rear of the unit. 2. Connect the keyboard cable to the PS/2 ports on the rear of the unit. Do not connect anything to the USB ports. 3. Power on the HP D2D and allow it to boot up until the console screen is displayed (see example below). Select the Network... option from the left-hand Menu. 4. Locate the IP address for the port(s) and make a note of it. 通过console设置的IP登录进管理页面 http://xxx.xxx.xxx.xxx 语言可以选择为“中文” 主页：D2D各项状态 配置页面： ①网络设置与更改 ②光纤通道设置： Switch模式：可以为默认值 Direct模式：需要设置速度与主机匹配、拓朴结构为环路 创建虚拟带设备 ①创建库 仿真类型：HP 1x8 G2 Autoloader (1x8), HP MSL Library(2x24), HP MSL Library (4x24). and HP D2DBS Library (4x48). 根据需求选择不同类型的MSL（driveXslot） 驱动器仿真：LTO-2 = 200GB, LTO-3 = 400 GB, LTO-4 = 800 GB 盒式磁带插槽总数、驱动器数：根据仿真类型选择 盒式磁带大小：根据LTO类型选择 重复数据删除：可压缩 端口：FC端口 条形码字符数目、条形码对齐方式：模拟物理磁带的Bar Code 以下为一些平时可操作和可以参考的状态信息