CL10SingleLEDController-LOCTITEEquipment.pdfVIP

Product Description Sheet CL10 Single LED Controller Item No. 1514636 PRODUCT DESCRIPTION The 1514636 CL10 Single LED System is a UV-LED spot light source that emits UV light at 365 or 405 nm. The Controller includes a footswitch and AC power cord. The required LED head is purchased separately. This system is suitable for manual work stations as well as for integrating into automated production lines. The UV LED Spot Cure System can be operated in a continuous light output mode or programmed output mode where the light output intensity and time can be programmed. The cycle can be initiated with a footswitch (included) or via a PLC connection with an external start signal. This LED light source causes no thermal damage or harmful effects to objects being irradiated. Its low power consumption makes it an energy-saving and environmentally friendly light source. No light guides or lamp replacements are required. PRODUCT FEATURES ? Instant on-off capabilities; no warm-up time required as compared to mercury-arc lamp UV Wand systems. ? LED head can be programmed for UV intensity and exposure time. ? LED heads 1538496 1750074 must be purchased separately. ? Temperature feedback, prevents LED head overheating PRODUCT BENEFITS ? Over 20,000 working hours. ? No IR emission resulting in low temperature curing. Will not damage parts due to heat emission. ? Up to 90% energy savings, compared with mercury arc lamps. ? Small, LED head for hand held or fixed fixture applications. ? Foot switch actuated or PLC remote control. ? Low maintenance cost. CL10 Single LED Controller Item No. 1514636 Intensity % Time S SET Controller Heads Henkel Americas 1-800-LOCTITE Henkel Europe +49.89.320800.1800 /industrial Henkel Asia Pacific +86.21.2891.8863 /industrial Product Description Sheet CL10 Single LED Controller Item No. 1514636 Technical Data Type Timer CL10 Single LED Controller Intensity:0~100%,Timer:0.1~999.9s MODE Manual Intensity (0~100%),Timer: Manual Control Power Suppy AC 100~24