乘数原理multiplicationprinciple.pptVIP

  1. 1、有哪些信誉好的足球投注网站(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
  2. 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  3. 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
  4. 4、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
  5. 5、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们
  6. 6、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
  7. 7、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
乘数原理multiplicationprinciple

* Quality Control 計數值管制圖2 * Quality Control 管制圖的判讀1 1) One point plots outside the 3-sigma control limits. 2) Two out of three consecutive points plot beyond the 2-sigma warning limits. 3) Four out of five consecutive points plot at a distance of 1-sigma or beyond from the center line. 4) Eight consecutive points plot on one side of the center line. 5) Six points in a row steadily increasing or decreasing. * Quality Control 管制圖的判讀2 6) Fifteen points in a row in zone C (both above and below the center line). 7) Fourteen points in a row steadily increasing or decreasing. 8) Eight points in a row on both sides of the center line with none in zone C. 9) An unusual or nonrandom pattern in the data. 10) One or more points near a warning or control limit. * 第10章 品質管制 * 連串檢定方法 連串(run):指擁有某種特性的一連串觀測值。 連串檢定方法: 檢查連串的向上與向下的連串數目 計算中位數上方與下方的連串數目 * 第10章 品質管制 * 連串檢定方法之步驟 將數字資料轉換並計算個別的連串數。 轉換成一系列的U 與D(即代表「上」與「下」) 轉換為一系列的A 與B(即「大於」中位數與「小於」中位數)。 計算連串數期望值與標準差。 區分出連串數的觀測值與期望值不同後,計算標準差數字z。 將數字與完全隨機系列的期望連串數比較。 將z 值與±2(95.5% 的z值)或其他期望值(例如,95% 的±1.96 或98% 的±2.33)互相比較。 若z 值超過期望界限,則表示存在非隨機模式。 * 第10章 品質管制 * 連串數的抽樣分配 可用來區分機遇變異及其他模式 * 第10章 品質管制 * 連串檢定公式彙整 其中  N =總觀測數  r = A 與B 或U 與D 的觀察連串數,取決於所涉及的檢定。 * 第10章 品質管制 * 例題6—連串檢定之計算 * 第10章 品質管制 * 例題6—解答 * Quality Control Choice of Control Limits “99.73% of the Data” If approximately 99.73% of the data lies within 3? of the mean (i.e., 99.73% of the data should lie within the control limits), then 1 - 0.9973 = 0.0027 or 0.27% of the data can fall outside 3? (or 0.27% of the data lies outside the control limits). 0.0027 is the probability of a Type I error or a false alarm in this situation. * Quality Control Types of Error1 Type I error - rejecting the null hypothesis when it is true. The risk of a point falling beyond the control limits, indicating an out-of-control condition when no assignable cause is present. Pr(Type I error) = ?. Sometimes called the producer’s risk. 可能造成不必要的預防成本與鑑定成本 * Quality Control Types of Error2 Type II error - no

文档评论(0)

118books + 关注
实名认证
文档贡献者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档