年产5000kgSOD精制车间的设计分解.doc

南 阳 理 工 学 院 本科生毕业设计 学院（部）： 生物与化学工程学院 专 业： 食品品科学与工程 学 生： 指导 教师： 完成日期 2013 年 5 月 年产5000kgSOD精制车间的设计 Design SOD Refined Workshop with 5000kg Annual Output 总 计：毕业设计2页 表 格： 1 个 插 图： 幅 本 科 毕 业 设 计 Design of SOD Refined Workshop with 5000kg Annual Output 学 院（部）： 生物与化学工程学院 专 业： 食品科学与工程 学 生 姓 名： 学 号： 指 导 教 师（职称）： 评 阅 教 师： 完 成 日 期： 南阳理工学院 Nanyang Institute of Technology  年产5000kgSOD精车间的设计 食品科学与工程专业 [摘 要] 5000kgSOD精制车间的设计，纯化和精制SOD粗品。首先，确定一种合理的生产工艺，对工艺各环节进行工艺论证，并且在此基础上根据产量、产品、原料的质量要求进行物料衡算和热量衡算，根据物料衡算结果进行设备生产能力需求的计算，选择主要设备型号，然后进行水、电、气的估算,最后绘制工艺流程图，根据设备选型结果和工艺流程进行车间布置，绘制车间平面布置图。经核算，该车间实际年产精品5100kg，本设计所选工艺、流程、设备类型及型号能够满足产量要求。本车间面积432m2，满足工艺布置，设备摆放要求。 [关键词] Design of SOD Refined Workshop with 5000kg Annual Output Food Science and Engineering Major Abstract：This paper was mainly to design an annual output of 5000 kg SOD refining workshop to purify crude SOD. First, the optimum technological process method was selected with every process being analyzed. On the base of technological process method, output requiring and product feature, the mass balance, heat balance, the amount of raw material, the supplement of material, water and stream were determined respectively. According to the calculations, the type of main equipment was selected. Finally, the flowchart was draw. And the ichnography of layout of workshop was draw based on the technological process and the equipment size. The actual output of this workshop was 5100 kg. The technological process, type and version of equipment selected could be appropriately for the production requirement. The area square of this workshop was 432, which could me