3如何在telnet上Linux主机后执行命令.docxVIP

1如何在 telnet 上Linux主机后远程执行主机上的shell脚本/archiver/tid-22151.html/archiver/tid-22151.html从 Windows telnet 到 Linux，建立 主机 与 设备 的通信，这是典型的嵌入式测试环境。我的问题代表了一类人的需求。[url]/forum/topic/82393-telnet-in-background/page__p__590023#entry590023[/url]这个4楼的帖子具有相当的参考价值。又是一种方法。稍作修改和封装，如下：[code];Using native socket connection to simulates a TELNET connection to communicate with Linux machine for sending commands and receiving info from it$port = 23$user = root$passwd = xxxxxxTCPStartup()$socket = TCPConnect($host, $port)If $socket = -1 Then MsgBox(48, Error, Connection fail!) ExitEndIfSleep(300)$ack = TCPRecv($socket, 150)If StringInStr($ack, login) 0 Then TCPSend($socket, $user @CRLF)?Sleep(500)?TCPSend($socket, $passwd @CRLF)Else MsgBox(48, Error, Cannot connect) ExitEndIfwait_cmd_prompt($socket)TCPSend($socket, $cmd1 @CRLF)wait_cmd_prompt($socket)TCPSend($socket, $cmd2 @CRLF)wait_cmd_prompt($socket)TCPCloseSocket($socket)TCPShutdown();================================================================================================;? ? ? ? Function Definition;================================================================================================;Wait for desired command prompt character # before sending.Func wait_cmd_prompt($sk) Local $ack Do $ack = StringStripWS(TCPRecv($sk, 300), 2) Sleep(300) ;MsgBox(0,,$ack) Until StringRight($ack, 1) = # ;MsgBox(0,,out of loop)EndFunc[/code]不过，我一楼发的问题还没得到解决。运行设备端（Linux环境）的脚本（shell脚本）远比远程命令控制来得可靠，因为这样Linux的一些环境变量是可继承的。继续研究中。minterz?发表于 2011-2-22 19:51linxu下的bash脚本如果要远程启动可以使用plink 使用ssh远程控制xiehuahere?发表于 2011-2-23 12:11谢谢楼上的，我试试。另外，这样也行：TCPSend($socket, /home/script.sh $param @CRLF)?Posted?14 October 2008 - 09:19 PMWhy not using native socket connections like following example.I am using this algorithm to communicate with my router (Linux machine) for sending commands and receiving info from it.Be sure to replace specific information.;BEGIN SCRIPT;simulates a TELNET connectionGlobal $host, $port, $delay, $user, $pass, $sk, $ack$host = $p