交换机配置文档.docVIP

ESwitching Basic Switching/Wireless PT Practice?SBA A few things to keep in mind while completing this activity: Do not use the browser?Back?button or close or reload any Exam windows during the exam. Do not close Packet Tracer when you are done. It will close automatically. Click the Submit Assessment button to submit your work. Introduction In this practice Packet Tracer Skills Exam, you will: configure VLANs using VTP configure inter-VLAN routing modify STP configure port security add a wireless LAN Addressing Table Device Interface Address Subnet Mask Default Gateway Router1 Fa0/0.10 172.16.10.1 255.255.255.0 n/a Fa0/0.20 172.16.20.1 255.255.255.0 n/a Fa0/0.43 172.16.43.1 255.255.255.0 n/a Fa0/0.67 172.16.67.1 255.255.255.0 n/a WRS Internet 172.16.67.10 255.255.255.0 172.16.67.1 Wireless 172.16.100.1 255.255.255.0 n/a SW_DS1 VLAN 43 172.16.43.11 255.255.255.0 172.16.43.1 SW_AC2 VLAN 43 172.16.43.12 255.255.255.0 172.16.43.1 SW_AC3 VLAN 43 172.16.43.13 255.255.255.0 172.16.43.1 PC1 NIC 172.16.10.10 255.255.255.0 172.16.10.1 PC2 NIC 172.16.20.10 255.255.255.0 172.16.20.1 PC3 NIC 172.16.10.11 255.255.255.0 172.16.10.1 PC4 NIC DHCP assigned 255.255.255.0 172.16.100.1 Note:?The password for user EXEC mode is?cisco. The password for privileged EXEC mode is?class. Step 1: Connect the Devices. Use the appropriate cable type to make the following connections: SW_AC2 FastEthernet 0/1 to PC1 SW_AC2 FastEthernet 0/11 to PC2 SW_AC2 FastEthernet 0/19 to SW_AC3 FastEthernet 0/19 SW_AC2 FastEthernet 0/20 to SW_AC3 FastEthernet 0/20 SW_AC3 FastEthernet 0/18 to WRS Step 2: Configure the Device Basics. a.???????Configure the following on SW_AC2. ??????????The switch name is?SW_AC2. ??????????The privileged EXEC mode uses the following encrypted password:?class ??????????Enable Telnet and console line login using the following password:?cisco ??????????Configure the banner message-of-the-day as?Authorized access only! b.???????To configure the switches for remote