通风与空调最终调试方案讲解.doc

GC4-RDE 通风空调调试方案 Plan for Ventilation and Air Conditioning Equipment 根据SPEC号 23 05 93 本次文件提交内容无偏差 According to the SPEC 23 05 93, the submittal has no deviation 目录 概况 调试工作范围 调试内容说明 执行标准 调试步骤 调试结论和报告 调试组织与部署 安全措施 调试必备条件 一、概况 I. Overview 1、工程概况 1) 工程名称： Project Name: 2）：建设单位： 4）设计单位： Designer:. 5）监理单位： Supervisor: 6）施工单位： Contractor: 2、工程简介 二、调试工作范围II. Scope of Commissioning 2.1．本调试工作可分为以下几方面 ① 各空调箱及通风机单机无负荷试车。No-load trial run for each single unit of air conditioner case and ventilator. ② 各空调箱及通风机风量、进口静压、出口静压、电流、转速、 电压的测定Measurement of blast volume, inlet static pressure, outlet static pressure, current, rotation speed and voltage of each air conditioner case and ventilator. ③ 机械送、排风系统的总风量测定。Measurement of total blast volume of mechanical air supply and exhaust system. ④ 机械送、排风系统的各风口风量测定、调节。Measurement and adjustment of blast volume of each tuyere of mechanical air supply and exhaust system. ⑤ 防排烟系统及排油烟机风机总风量及风口风量测定。Measurement of total blast volume and tuyere blast volume of smoke prevention and exhaust system and oil smoke exhauster fans. 2.2．调试工作的责职① 空调系统的调试是集业主技术参数的提供合理性，设计的正确与否及设备供应方技术性能，施工的工程质量等均可对系统性能产生一定的影响，调试人员在调试过程中如发现由于上述原因无法进行工作时，应及时向施工单位、业主、总包、监理反映。Commissioning of the air conditioning system is intended for reasonableness of technical parameters provided by the owner, correctness of design, technical characteristics of equipment supplier and construction quality, which have an impact on performance of the system. The commissioner shall, if finding it impossible to work as a result thereof in the commissioning process, reflect it to the contractor, the owner, the general contractor and the supervisor in due time. ② 由于测试是调试的前提，只有通过测试才能了解系统的运转的状况。现场存在问题的原因是多种的，所以很难用一种固定模式来解决上述问题，如出现问题我们会及时向施工单位、业主、设计、监理汇报，协商解决问题措施。prerequisite to commissioning, operating condition of the system can be known only by passing the tests. There are many kinds of problems existing at the site, so it is very difficult to solve the proble