通力电梯1-8菜单..docVIP

E 故障 功能 默认值 最小值 最大值 数据 描述 　 1 故障历史 * * * 1=最近纪录 按箭头健滚动故障纪录 2 清除故障历史 * 0 1 设定1时清除故障纪录 从E 菜单中清除故障纪录 d 驱动故障 　 　 　 1 电梯参数 功能 默认值 最小值 最大值 数据 描述 必需 1 主楼层 1 ** ** 楼层数 选择主入口楼层, 对下集选非常重要, 因为所有的外呼都朝向主楼层. 2 控制模式 2 1 6 1=SBC，2=DC，3=FC，4=PB，5=MPB，6=FC带DIA 外呼集选方式, SBC=单按钮集选, DC=下集选, FC=全集选, PB=按钮,MPB=记忆按钮有DIA. 3 液压电梯 0 0 7 0=没有，1=液压梯，2=防滑行，3=液压+液缸限位开关，4=防滑行+液缸限位开关 5=KCM831 Hydro with telescopic jacks 6=KCM831 Hydro with PPS 7=KCM831 Hydro with telescopic jacks + PPS 　 安全 4 PIN code in use 0 0 1 0=PIN code not in use 1=PIN code in use Enables or disables the PIN code features. 5 PIN Code Activated Features and Car Call PIN Code Locking (PCL) Setup 0 0 304 UI Range 0 to 99 0=Setup of PCL and PIN codes accepted 1=Define floors of locked group 1 2=Define floors of locked group 2 ... 63=Define floors of locked group 63 ------------------------------------------------- UI Range 100s 1-00=Reset (clear) all locked groups 1-01=Reset (clear) locked group 1 1-02=Reset (clear) locked group 2 ... 1-63=Reset (clear) locked group 63 ------------------------------------------------- UI Range 200s 2-00=Set PIN code for Master group 2-01=Set PIN code for group 1 2-02=Set PIN code for group 2 ... 2-63=Set PIN code for group 63 ------------------------------------------------- UI Range 300s Set PIN code for PIN activated features: 3-01=PRC 3-02=OSS 3-03=OCL 3-04=OCV UI Range 0 to 99 Define the floors that are members of each PIN code locked group. UI Range 100s Clear the floors that were set via 1-5-1 to 1-5-63. Individual groups can be cleared, or all groups can be cleared at one time. UI Range 200s Program the PIN code for the locked groups that can be deactivated via a PIN code entry on the COP. Only available if menu item 1-4 = 1. UI Range 300s Program the PIN code for the features that can be activated/deactivated via a PIN code entry on the COP. Only available if menu item 1-4 = 1. Notes: 1) Elevator must be in RDF (machine room inspection) when this is changed. 6