本科毕业设计论文--北方某城市给水厂工程设计.doc

X X 工 业 大 学 毕业设计说明书 作 者： XXX 学 号： XXXXXX 学 院： XX工业大学 系(专业)： 给水排水工程专业 题 目： 北方某城市给水厂工程设计 指导者： XX 讲师 评阅者： 2016 年 12 月 18 日 毕业设计（论文）中文摘要 北方某城市给水厂工程设计 摘要： 本设计为北方某给水厂工程设计，地点在包头市。包头本身有一个给水厂，但是不能满足现在的居民生活和生产要求，所以亟需新建水厂。净水厂原水来自黄河水，黄河沿包头市区南部流过，水量丰富，是包头市工农业生产的主要水源。有部分指标超标分别为化学需氧量、总铁、氨氮、贡、大肠菌群和总磷。 选择合适的处理工艺对给水处理非常重要，传统的给水处理一般流程为混凝、絮凝、沉淀、过滤和消毒。根据水质特点本设计采用预沉淀清除浊度，然后再采用混凝、絮凝沉淀和过滤。为了去除一些有机物和汞在过滤后又加了一个活性炭过滤，然后再消毒，最后要满足服务水头供到供水管网。 关键词：混凝、絮凝、沉淀、过滤 毕业设计（论文）外文摘要 Title North of a city water plant project design Abstract The design was the northern water treatment plant engineering design, in Baotou City, Baotou has a water treatment plant, but it can not meet the living and production requirements, so the new water treatment plant need to builded urgent. Water treatment plant raw water is from the Yellow River, the south of the city of Baotou along the Yellow River,and the Yellow River water volume was in rich,was the main source of water for industrial and agricultural production in Baotou City. There are some indicators exceeded chemical oxygen demand, total iron, ammonia, and Kung, coliform bacteria and total phosphorus. Select the appropriate treatment process to water treatment is very important, traditional water treatment processes was coagulation, flocculation, sedimentation, filtration and disinfection. According to the water quality characteristics of this design pre-sedimentation clear turbidity, then by coagulation, flocculation and sedimentation, and filtration.To remove organic matter and mercury add an activated carbon filter after the filterand then disinfected, and finally to meet the service head for to the water supply pipe network. Keywords：Coagulation, flocculation, sedimentation, filtration 目 次 1.