《电器产品产品合格证中英对照.docVIP

苏州迪生电器有限公司 Suzhou Disheng Electrical Appliance Co., Ltd.? DGCK，GGD2，GXL例行（出厂）检验报告 DGCK, GGD2, GXL routine (factory) inspection reports 项目名称Project Name 编号NO. RD-8.3-03-01 产品名称Product Name： 型号规格Model： 出厂编号serial number： 序号No. 试验项目testing items 标准要求standards 测试设备testing device 测试结果 Testing results 备注 remark 1 一般检查General examination 1、电器元件应经过检验合格，有合格证明书。electrical components should be subject to inspection, with a certificate of compliance 目测visual 2、安装的电器元件与设备表相符合。the installation of electrical components and devices table match 目测visual 3、壳体及门的几何尺寸、焊接表面涂覆，电镀层符合规定要求。Dimension of shell and door welding surface coating, electroplating layer meet requirements. 目测visual 3m钢卷尺 3m steel tape 4、接地、相序色标、联结、名牌数据正确无误。ground, phase sequence color, link, brand-name data is correct. 目测visual 5、接地符号应明显，检查接地电路的联接性。grounding symbols should be clear, check the connection of the ground circuit 目测visual 2 电气间隙爬电距离 1、主电路各带电部位与接地金属构件之间的电气间隙及爬电距离应不小于20mm。electrical distance and creepage distance between the parts the main circuit and metal components ground should be not less than 20mm. 0-150mm钢直尺straight steel ruler 2、电气间隙electrical distance≥10mm 3、爬电间隙creepage distance≥12.5mm 3 手动操作试验互换性试验interchangeable test a manual test 1、任一可移开部件在同一规格的两个隔离室中各抽插5次，检查互换情况，抽插应灵活。any parts can be removed in the same specification of the two isolation rooms inserted and taken out five times, check the exchange situation, inserted and taken out should be flexible. 手动操作manual test 2、手动操作部件操作5次，操作灵活无卡滞现象。机械电气连锁有效。parts be manually operated five times, operation flexible, no clamping stagnation . Mechanical electrical chain effective. 4 通电操作power operation 通电操作5次，电器元件动作正常、仪表指示准确，符合装置的电气设计要求。 Power operation five times, electrical components work well, instrument instruction accurate, meet the electrical design requirements. 通电操作台Power console 5 工频耐压试验 frequency voltage withstand test 施加交流正弦50Hz电压2500V，施压