VisteonSpecificRequirementsforTS(Dec172003)..docVIP

Visteon Corporation Customer Specific Requirements For Use With ISO/TS 16949: 2002 Visteon Corporation Customer Specific Requirements to ISO/TS 16949:2002 Introduction Quality professionals from Visteon collaboratively developed this document. The content of the document was developed using the Customer Specific Documents of several automotive OEMs and with the consultation of the Joint Task Force for Supplier Quality, Automotive Industry Action Group (AIAG). Key contact for interpretation of this requirements document is: Visteon Corporation: Supplier Development / Performance Manager Visteon Technical Center 16630 Southfield Road Allen Park, MI 48101 Fax: 313-755-9644 Email: supplierperformance@ 2. Customer Requirements Document Structure This document is structured as a companion document to ISO/TS 16949:2002. The paragraphs to this document mirror the paragraphs to ISO/TS 16949:2002. Where guidance by the customer is referenced, a requirement will be stated to clarify Visteon interpretation. For suppliers of semiconductor components, the Customer Specific Requirements (ISO/TS 16949:2002) Semiconductor Commodity uses this same structure and should be used as a companion requirements document to this document and ISO/TS 16949:2002. The requirements of all three documents must be met where applicable. Some additional requirements are contained in the Annex B, which is not auditable by registrars. The contents of this entire document are considered requirements for doing business with Visteon and should be implemented even if the organization is not registered to ISO/TS 16949:2002. In second party audits, the expectation of Visteon is that all these requirements (where applicable) are implemented. Reference Documents The following reference documents are available through AIAG (248-358-3003) or Carwin Continuous (UK) in Europe (44-1-708-861333) and shall be used to develop the quality system. Th