3500M绞吸式挖泥船简介-200..docVIP

3500m3/h绞吸式挖泥船简介 总体： 船舶用途 本船是一艘非自航绞吸式挖泥船，设计挖泥能力：在一定条件下挖泥产量为3500m3/h泥浆，输送距离为4~5公里。挖泥深度27米。 船型 本船船体为箱形船，钢质焊接结构，局部设双层底、单甲板、采用混合骨架式。本船挖泥作业的移船与定位采用三缆定位系统。 检验证书 CCS证书。检验：中国船级社（CCS）温州检验处 船舶主要要素 总长：101.3m 型宽：18.2m 型深：5.2 m 吨位丈量： 总吨位：2943 净吨位：883 主要轮机设备 （进口）舱内泥泵柴油机 生产厂：MAN16RK270（英国MAN BW）4400kw×1000rpm×1台 舱内泥泵和水下泥泵（WNB7500（S）WNBX3400） 生产厂：采用美国“艾力考特”技术，长沙水泵厂合资生产 （3）（进口）液压油泵：川崎定量柱塞双联泵K3V280DHT （4）（进口）液压马达：HMB-400（STAFFA） 6、作业设备简介： 绞刀及其驱动设备装置：该系统包括绞刀、轴系、齿轮箱和液压马达。绞刀安装在桥架的端部，采用六台液压马达带动齿轮箱联合驱动。 7、图纸设计单位： 上海交通大学船舶与海洋工程设计研究所 8、船舶制造单位： 浙江宏冠船业有限公司 9、船舶所有人： 福建兴港船务有限公司 Brief Introduction to A Cutter Suction Dredger 3500m3/h General Description Application of shipping This dredger is a non-propelled cutter suction dredger, dredging capacity designed: under given conditions the dredging capacity is 3500m3 slurry per hour, conveyance distance is 4~5km,dredging depth is 27meters. Shape of ship Hull of this ship is box-shaped ship, steel-quality welded construction; its part is equipped with double bottoms, single deck and adopt combination system of framing. Moving and positioning of dredging operation of this ship adopts 3-cable positioning system. Inspection certificate CCS Certificate. Inspected by: Wenzhou Inspection Office of China Classification Society (CCS) Principal characteristics of shipping: Total length: 101.3m Breadth moulded: 18.2m Depth moulded: 5.2m Tonnage measurement Gross tonnage: 2943 Net tonnage: 883 Main equipments of marine engine (Import) Underdeck dredge pump diesel engine Manufacturer: MAN16RK270 (BRITISH MAN BW) 4400KWX100RPMX1SET Underdeck dredge pump and underwater dredge pump (WNB7500 (S) WNBX3400) Manufacturer： Adopted ELLICOTT technology from America to be manufactured by Changsha Water Pump Factory with joint investment.) 3)(Import) Hydraulic oil pump: KAWASAKI fixed-quantity plunger duplex pump K3V280DHT 4)(Import) Hydraulic motor: HMB-400 (STAFFA) Brief introduction of equipments Cutter and device of i