金属专业英语2金属专业英语2.docVIP

分享 返回分享首页? 分享 金属材料科学专业英语（2） 来源： 张景尧的日志 Grade, Plating type, Designation of Coating Mass Common Coating Mass 镀层质量标记 Markings Designations of Differential Coatings 硬度 Hardness 单相轧压镀锡薄铁片(白铁皮/马口铁) Single-Reduced Tinplate 双相辗压镀锡薄钢片(马口铁/白铁皮) Dual-Reduction Tinplate 钢的种类 Type of Steel 表面处理 Surface Finish 常用尺寸 Commonly Used Size 电器用硅 [硅] 钢片 Electrical Steel Sheet 简介 General 软磁材料 Soft Magnetic Material 滞后回线 Narrow Hystersis 矫顽磁力 Coercive Force 硬磁材料 Hard Magnetic Material 最大能量积 Maximum Energy Product 硅含量对电器用的低碳钢片的最大好处 The Advantage of Using Silicon low Carbon Steel 晶粒取向(Grain-Oriented)及非晶粒取向(Non-Oriented) Grain Oriented Non-Oriented 电器用硅 [硅] 钢片的最终用途及规格 End Usage and Designations of Electrical Steel Strip 电器用的硅 [硅] 钢片之分类 Classification of Silicon Steel Sheet for Electrical Use 电器用钢片的绝缘涂层 Performance of Surface Insulation of Electrical Steel Sheets 晶粒取向电器用硅钢片主要工业标准 International Standard – Grain-Oriented Electrical Steel Silicon Steel Sheet for Electrical Use 晶粒取向电器用硅钢片 Grain-Oriented Electrical Steel 晶粒取向，定取向芯钢片及高硼定取向芯钢片之磁力性能及夹层系数(日工标准及美材标准) Magnetic Properties and Lamination Factor of SI-ORIENT-CORE SI-ORIENT-CORE-HI B Electrical Steel Strip (JIS and AISI Standard) 退火Annealing 电器用钢片用家需自行应力退火原因 Annealing of the Electrical Steel Sheet 退火时注意事项 Annealing Precautionary 碳污染 Prevent Carbon Contamination 热力应先从工件边缘透入 Heat from the Laminated Stacks Edges 提防过份氧化 No Excessive Oxidation 应力退火温度 Stress –relieving Annealing Temperature 晶粒取向电器用硅 [硅] 钢片 – 高硼(HI-B)定取向芯钢片及定取向芯钢片之机械性能及夹层系数 Mechanical Properties and Lamination Factors of SI-ORIENT-CORE-HI-B and SI-ORIENT-CORE Grain Orient Electrical Steel Sheets 晶粒取向电器用硅 [硅] 钢;片 – 高硼低硫(LS)定取向 钢片之磁力及电力性能 Magnetic and Electrical Properties of SI-ORIENT-CORE-HI-B-LS 晶粒取向电器用硅 [硅] 钢片 – 高硼低硫(LS) 定取向钢片之机械性能及夹层系数 Mechanical Properties and Lamination Factors of SI-ORIENT-CORE-HI-B-LS 晶粒取向电器用硅(硅)钢片-高硼(HI-B)定取向 芯钢片，定取向芯钢片及高硼低硫(LS)定取向芯钢片之厚度及阔度公差 Physical Tolerance of SI-ORIENT-CORE-HI-B, SI-ORIENT-CO