微波炉验货指导书.docVIP

Work Instruction For Inspection of Microwave Oven 微波炉验货作业指导书 1.0 Inspection Sampling Plan : 抽样计划 AQL sampling plan : AQL抽样计划 BS6001 ANSI/ASQ Z1.4-2008 single sampling plan for normal inspection is the most widely accepted method of sampling by attributes. It is based on the mathematical theory of probability and offers the advantage of clearly defining “the number of samples to be drawn for inspection from a given lot or consignment “and “the maximum number of defective samples allowed in the sample size”. BS6001 ANSI/ASQ Z1.4-2008于一般验货的单个批次的抽样计划是最为广泛接受的根据属性进行抽样的方法。它基于概率论的数理统计并规定了单个批次的抽样数以及该抽样数中最多允许的缺陷样品的数量。 Type of service Sampling plan Critical Major Minor FRI II Nil 1.5 4.0 Export carton sampling: 外箱抽样 “Square root of total export carton quantity” * “外箱总箱数的平方根”* Inspection contents: 检验内容 a : Check all information of product against client’s document/specification : Any discrepancy found like packaging/color/shape/character/function/components/ etc., record the discrepancy on report and put the result as “On Hold”. Client will confirm if approved sample is available for inspection or not. a : 核对产品与客人的资料如包装/颜色/形状/参数/功能/配件/等,如发现任何差异,则记录在报告上并将结果判定为”ON HOLD” .客人将确认是否有签板. Note : Client’s model number is different from the model number on UL file. 注意 ：客户的型号与UL报告中工厂的型号不同. b : Bar Code Scanning Test(S4) : Ensure bar code is scannable and scanned result matches the readable code and client’s specification/sample. b : 条码扫描测试(按S4抽样): 确保条码可扫描并扫描结果与数字码及客人要求/签板相符. c : Packaging Check(GII) : Ensure packaging is clean and dry, the carton was well sealed, literature on carton should be complete and with correct information. c : 包装检查(GII) : 确保包装干净干燥, 卡通箱封好, 印刷的文字完整并正确. d. Microwave Leakage Test-Critical(GII) : Under maximum power consumption, the microwave leakage from the door sealer gap should be less than 1mW/cm2. d. 微波泄漏测试-致命缺陷(GII) : 最大功率情况下，门缝处微波泄漏应小于1mW/cm2. e. Hi-pot Test-