成都信息工程学院通信工程学院文翻译英文翻译.docVIP

成都信息工程学院通信工程学院 本科毕业论文设计 英文→中文 翻译 论文题目 红外光通信系统设计 姓 名 邓谋 专 业 通信工程 班 级 2010级一班 学 号 2010101039 指导教师 赵建 日 期 2014年 02 月 27 日 英文原件内容： Introduction Infrared remote control system is mainly composed by the remote control transmitter, integrated receiver head, microcontroller, interface circuit shown in Figure 1. The remote control is used to generate the remote encoder pulse drive infrared emission control output of the infrared remote control signal, the remote control receiver on the remote control signal amplification, detection, shaping, demodulation remote encoder pulse. The remote control encoder pulse is a serial binary code for the infrared remote control system, the serial code input to the microcontroller, its internal CPU instruction decode on the remote control, and perform remote control functions. Using the remote control as the input of the control system, we need to address the following key questions: how to receive the infrared remote control signal; how to identify the infrared remote control signal, and decoding software design, design of control procedures. SCM history SCM was born in 1971, has gone through three major phases of the SCM, the MCU SoC.It consists of computing device, controller, memory, input output devices.Its full name is a single-chip microcomputer, is typical of embedded micro-controller (Microcontroller Unit), the commonly used letters of the abbreviation MCU single-chip, and it was first used in the field of industrial control.Master microcontroller technology to enable more people in the industry, students, enthusiasts, product developers, the question arose due to the extensive application of SCM in the field of industrial control, microcontroller development board, the more famous such as e-DZR-01A microcontroller development board.Microcontroller chip dedicated processor developed from the CPU.The first design concept by a large number of peripherals and CPU integrated in a singl