CACTI流量加教程详细说明.docVIP

流量叠加教程 1、点击图形管理----》再点击右上角的ADD 2、出现选择图形模块，直接创建 3、在新开的页面中的graph configuration 的对话框中输入标题名称。点下面的创建 4、出现如下页面，这时就可添加要叠加的数据源了，点Graph items右边的ADD 5、在下面的窗口，主机选择你的设备，数据源选择你要叠加流量的端口。图形项目选AREA. Cdef功能选 Turn bytes into bits 点创建即可 6、重复以上步骤，添加第二个叠加的端口。如下图，注意图形项目类型选。STACK 7、完成后如下图 8、下面我们再来创建图片下面的数据。 点击graph items右边的ADD。在弹出的页面上选如下选项。 9、同样的方法添加第二个端口，添加完成后如下图 10、我们接下来再把这两个数据加起来。点击graph items右边的ADD，数据源不写。 11、最后完成后如下图， ships of 72 and a half the Harbour, like room Tao Yuan. Triangle at the cemetery (Shanghai, Nanjing and Hangzhou), and the small triangle (Soviet Union, Ka, Lake) where the hinterland, at the junction of Jiangsu, East, South and west sides respectively, and jiaxing in Zhejiang Province, Wuzhen, Nanxun town and connected. After the liberation, 17 townships, Yan Tomb, provided there is a town, District Administration had in town. A unique geographical environment, has become the militarys battleground. On November 5, 1937, Japan 10th army landed in Hangzhou Bay, North Bay, on November 12, Shanghai fell. Part of the Japanese army to the North along the flood of jiaxing railway, Jiujiang road, invaded Wu Jiang. On November 18, the Japanese army occupied Wujiang city. Stationed in Wujiangs ships of 72 and a half the Harbour, like room Tao Yuan. Triangle at the cemetery (Shanghai, Nanjing and Hangzhou), and the small triangle (Soviet Union, Ka, Lake) where the hinterland, at the junction of Jiangsu, East, South and west sides respectively, and jiaxing in Zhejiang Province, Wuzhen, Nanxun town and connected. After the liberation, 17 townships, Yan Tomb, provided there is a town, District Administration had in town. A unique geographical environment, has become the militarys battleground. On November 5, 1937, Japan 10th army landed in Hangzhou Bay, North Bay, on November 12, Shanghai fell. Part of the Japanese army to the North along the flood of jiaxing railway, Jiujiang road, invaded Wu Jiang. On November 18, the Japanese army occupied