GJ型双段精密整机说明书.docVIP

精 密 整 平 机 GJ 系 列 使 用 说 明 书 一、前言 首先很感谢贵公司使用东莞市晋德五金机械有限公司的双段式薄板型精密整平机。本机适用于对薄板材料进行滚动整平，消除板材内部应力，从而达到整平后的板材不易回弹变形。本机可连接冲床，剪板机或其它设备实现自动化生产，提高生产效率降低低人工的成本。在本机使用之前，请详细阅读说明书，掌握应用正确的使用方法，使本机能充分发挥其优越功能。 二、产品规格表 段式精密整平机（GJ系列） 型? 号 GJ-100 GJ-200A GJ-300A 料厚 (mm) 0.1~0.6 料宽 (mm) 0~100 0~200 0~300 滚轮排列 ?20(上9/下10) 调整方式 点独立 送料速度 0~16m/min 电动机 1/2HP 1HP 送料方向 左-右 使用电压 AC三相200V/380V 重量(kg) 0 280 350 三、产品结构 １．此系列矫正机专门针对需高精度冲制之材料产品而设计。众所周知，卷料 未经过整平并消除应力是无法生产出良好产品的，因而矫正机的性能在生产中起着关键作用。 ２．由于材料各点曲率不一，单一矫正滚排布并不能达到高精度矫直要求，GJ系列 独创性的采用小排距精矫，从而达到客户冲压使用要求。 ３．本机整平及矫正辅助轮皆采用进口ＳＵＪ２制造，热处理ＨＲＣ６０o后研磨， 镀硬铬后研磨加工，确保硬铬层均匀及每条轴的形状公差。 ４．本机采用浮动四点平衡微调装置，附有百分表， ５．本机采用万向节传动，齿轮传动，适合矫直精度要求高的产品。 ６．全机采用高精度轴承，加装润滑系统，以延长使用寿命。 ７．系列精密机的每一都配备了整平辅助轮，确保其在生产过程中不会发生弯曲变形，从而提高了产品的平面度质量。 ８．上下辅助滚轮均采用固定式，增进了上下轮刚性，防止受力变形。 ９．由于材质、料宽及料厚的不同，所以并无统一的数值参考，因此建议，于大批量生 产前先取小段材料试矫，待达到效果后再连续生产。 八、电路图： consciousness. Awareness of the overall situation of political consciousness, consciousness, core, par. This four Consciousnesses embodies the fundamental political orientation, political stand and political demands, is the touchstone of testing political quality of party members, and study the effect of education an important yardstick. Well the Constitution Party rules to comply with, series speaks well, important is to see that four Consciousnesses tree good is not in prison. To put enhanced four a consciousness as learning education of a fundamental requirements to implement, education guide General members always firm right of political direction, active consciously to to Central par, and to XI General Secretary par, and to party of theory and route approach policy par, strongly maintenance central authority, maintenance party of led core, always in thought political Shang action Shang with to XI comrade for General Secretary of Central keep height consistent. Every party member has to do, what they advocate, responded positively to the CPC Central Committee, the CPC Central Committee decision, serious practice