K370 移动OS机操作说明.docVIP

POS机基本操作 请注意 写卡方式：16位明码卡号后面多加8个1 写卡共位24位 如：058812546399555811111111 操作员管理 说明 操作员号 密码 高级管理员 99 管理员 00 123456 业务操作员 01 0000 业务操作员 02 0000 业务操作员 03 0000 安全密码 POS机数据正确接口 POS机管理系统设置 长按“开/关”键 开机 第一大操作步骤 POS机基本操作设置 键盘输入： 99 密码 注意：以上的步骤结束之后都是按“确认” 直至回到界面 第二大操作步骤 2.通讯参数设置 注意：以上的步骤结束之后都是按“确认” 直至回到界面 第三大步骤 1.终端密钥管理 2.主密钥索引号：0 3.输入手工密钥（16位）：3131313131313131 连续点击：“取消” 业务员登陆操作 section of the Department of project management; Project documents and information: Project Engineering Department; Materials and equipment: material supply projects; Security controls: the project Department of safety and security; Construction machinery: Project Engineering Department; Financial: Project Management Department of finance; Security and fire services: project security. 3.3.5 management representative and project manager in this item specifies that the Chief Engineer is the management representative, responsible for the operation of quality management system and supervision, regardless of how his other responsibilities, should have a clear mandate to: ensure that the quality management system is implemented and maintained; The running of the quality management system to the project manager, including needed improvements; Always be aware that the customers needs and requirements. 3.4 3.4.1 project management review should be an annual review of its quality management system to ensure its continuing suitability, adequacy and effectiveness. 3.4.2 Administration review by the project manager responsible for organization and implementation, project quality control Department is responsible for specific tasks. 3.4.3 the management review should compare and evaluate the following input: internal and external quality audits and corrective effect; Customer feedback on the construction, installation, commissioning, service information (complaints and satisfaction); Quality records