薄型单玻璃丝包聚酰亚胺薄膜绕包铜扁线.docVIP

湘潭电机力源电线电缆有限公司 XIANGTAN ELECTRIC MANUFACTURING LIYUAN CABLE WIRE ,LTD. 薄型单玻璃丝包聚酰亚胺薄膜绕包铜扁线 Thin single Glass Covered and Polyimide Film Wrapped Rectangular Copper Wire 1、用途及特性：本产品适用于F级大中型电机、电器的绕组。具有优良的电气性能和较高的机械特性及耐湿热性能。 1、Applications and Characters This product is used in making windings of class F large and medium size motors and electric appliances. It possesses good electrical and mechanical property and damp and heat resistant. 2、型号名称及温度指数： 2、Type, name and temperature index 型 号 Type 名 称 Name 温度指数 Temperature Index SBMB-XX/155-1Y3F1 单玻璃丝包聚酰亚胺薄膜绕包铜扁线 Single glass covered and polyimide film wrapped rectangular copper wire 155 3、规格 3、Specification Side a a 边 0.90mm～5.60mm Side b a 边 2.00mm～16.00mm 4、执行标准： 4、Adopted Standard： 薄型单玻璃丝包聚酰亚胺薄膜绕包铜扁线 Thin single Glass Covered and Polyimide Film Wrapped Rectangular Copper Wire 5、主要技术要求： 5、Main Technical Requirements 项目名称 Item 技 术 要 求 Technical Requirements 试验方法 Test Methods 导体尺寸及圆角半径 Conductor size and Radius of corner 符合GB7672.1第7.2条规定 As shown in article 7.2 of GB7672.1 GB/T 4074.2 绝缘厚度（A-a） Insulation thickness 绝缘厚度mm Insulation thickness 偏差 % Tolerance GB/T 4074.2 0.20 0.30 -15 直 流 电 阻 D.C. Resistance 导体在20℃时的单位长度直流电阻R20应符合GB7672.1第8.3条规定 The D.C. resistance of conductor per unit length at 20℃ should conform to article 8.3 in GB7672.1 GB/T 3048.2 伸长率 Elongation 标称尺寸mm Nominal dimension 伸长率 % Elongation GB/T 4074.3 a≤2.5 a＞2.5 ≥30　 ≥32 弯 曲 Bending 标称尺寸mm 轴直径 mm Mandrel diameter 按规定轴径进行宽边各窄边弯曲180°，绝缘层应不开裂至露铜 As specified bending thickness side and width side to 180°,the insulation layer should not crack to appear the copper GB/T 4074.3 2.00≤b≤8.00 8.00＜Insulation thickness 击穿电压 Breakdown voltage GB/T 4074.5 0.20 0.30 ≥2500 厂址：湖南 湘潭 下摄司 Add: Xiashesi Xiangtan City, Hunan P.R.C 电话：（0732）座机电话号码 座机电话号码 TEL: 86-21-座机电话号码 86-21-座机电话号码 传真：（0732）座机电话号码 FAX: 86-21-座机电话号码 邮编：411101 Zip: 411010