包包袋子检验.docVIP

1.0 GENERAL The conditions described below are the most commonly found and do not necessarily cover all possible conditions.Any other functional or visual non-conditions shall be initially classified according to the following. The following checking list is apply to all kind of bags. 1.0前言 以下所描述的条件是所有功能或以下分类。 以下适用于所有袋子。 ANST/ASQC Z1.4-1993一次抽样检查方案确定检查样本大小功能安全。 0 2. Major -1.5 2.5 3.Minor -4.0 4.0 抽样检验方法应该根据ANST/ASQCZ1.4-1993 ， (参见附录A) AQL： OEM和品牌项目 其他项目 0 2. 主要 -1.5 2.5 3. 次要 -4.0 4.0 Special Instruction: When lot is checked against approved sample,any deviation(material,cosmetic, Construction,performance,packaging etc.)from approval sample must be recorded in detail in the “Remark section of shipment inspection report for disposition. 2.3 特别说明： 当任何材料检查报告 a) Critical –is a defect that poses a hazardous or unsafe condition to individuals using the product;will cause personal injury or serious damage. b)Major –is a defect that substantially prevents the product that can still be improved and does not affect the judgment. c) Minor –is a shortcoming in manufacture of the product that can still be improved and does not affect the judgment. 瑕疵Csassification ：2.4.1 瑕疵被分3类 a) 严重：此类瑕疵潜在的不安全因素将导致个体在使用当中造成人身受伤或严重。 b) 主要产品仍然改进和不影响。 c) 可改进和不影响。 2.4.2 随机抽验的说明： a)如果同一个样品有几个瑕疵，最严重的瑕疵。 b)必须被替换或c)如有大范围的严重不良，整批货应该当作不接受而全部重做。 Does not match approved sample such as shape,size,color,dimension thickess(per severity) 与确认样不符，包括形状、尺寸、颜色、规格、厚度 × × material used not the same as approved sample 材料与确认样不一致 × 3.1.2 Fabric/面料 Wrong material,included lining and mesh. 面料错误包括内里和网布 × Color deviation (Compare with approval sample)(per severity) 颜色偏差（与确认样对比） × × Broken yarn,missing yarn(per severity) 断纱、抽纱 × × Filling bars or slob 掺有其他杂质 × Material torn or with hole 破洞 × Fabric split (per severity) 面料裂开 × × Wrinkle/Creases mark (per severity) 褶皱起波浪 × ×