永磁磁力滚筒.docVIP

永磁磁力滚筒Permanent magnetic drum 产品优势Product advantages 1、性能质量高 2、筒体表面可包贴国际上著名的鑫海耐磨橡胶 1. Good performance and high quality 2. The surface of the drum can be covered with Xinhai abrasion resistance rubber which is famous for its super wear resistance Contact us 座机电话号码 产品介绍Product Introduction 产品特点产品应用产品原理技术参数feature Product application Product principle Technical parameter 产品特点Product features筒体表面可包贴国际上著名的鑫海耐磨橡胶。The surface of the drum can be covered with Xinhai abrasion resistance rubber which is famous for its super wear resistance. 产品应用Product Application 分选大块（如200～0mm）强磁性物料。Separate large block e.g. 200~0mm ferromagnetism materials. 产品原理Product Principle物料均匀的给到皮带上，当物料经过永磁磁力滚筒（或磁滑轮）时，非磁性或磁性很弱的颗粒在离心力和重力的作用下脱离皮带面；而磁性较强的颗粒则受磁力的作用被吸在皮带上，并由皮带带到磁滑轮的下部，当皮带离开磁滑轮伸直时，由于磁场强度减弱而落入磁性产物槽中。The materials are uniformly fed to the belt. When materials go through the permanent magnetic drum, the non-magnetic and low-magnetic particles will leave the belt surface because of the centrifugal force and gravitation. Meanwhile, strong-magnetic particles are absorbed to the belt by magnetic force and then fall into the magnetic trough when the belt leaving the magnetic pulley. 技术参数Technical Parameters 型 号 筒径 mm 筒长 mm 皮带宽度 mm 筒表平均磁场强度 mT 允许扭矩 N.m 分选物料粒度 mm 处理量 t/h 机重 kg CT-0404 410 465 400 150-160 1300 10-40 20-30 250 CT-0505 520 500 150 20-40 500 CT-0506 600 500 2100 40-60 600 CT-0507 750 650 2120 60-80 700 CT-0707 750 160 2860 10-60 80-100 1200 CT-0709 950 800 5500 100 1620 CT-0816 800 1600 1400 9760 1OO-150 2850 CT-1010 1000 970 800 200-210 5590 10-100 150-200 3410 CT-1012 1170 1000 200 10680 ≤100 200 4010 CT-1014 1400 1200 12810 4600 CT-lOl6 1600 1400 160-210 14920 10-100 150-200 5200 CT-12lO 1200 970 800 8380 4380 CT-1212 1170 1000 160 10470 ≤100 200 5280 CT-1214 1400 1200 12570 6070 CT-1216 1600 1400 14580 6670 CT-1218 1800 1600 16620 7260 CT-1412 1400 1200 1000 16000 ≤l20 6000 CT-1414 1400 1200 20000