毕业论文（设计）基于AT89C51型单片机的电磁流量计说明书.docVIP

XXXXXXXXXXXXX 本科毕业论文（设计） 题 目 基于AT89C51型单片机的 电磁流量计 　 　 指导教师　　XXX 职称 助教（硕士） 学生姓名 　　 XX 学号 20061081206 专 业 　电子信息工程 班级 电信二班 院 （系）　　 电子信息工程学院 完成时间 　 2010年4月30日 　 基于AT89C51型单片机的电磁流量计 摘 要 石油化工是我国国民经济的支柱产业之一，其所实现的利润约占全国国有及国有控股企业总利润的1/4左右。油井产量的计量是油田生产管理中的一项重要工作，对油井产量进行准确、及时的计量，对掌握油藏状况，制定生产方案，具有重要的指导意义。ABSTRACT Petrochemical industry is one of the pillars of our national economy, which makes about 1 / 4 profits of the state-owned and state holding enterprises’ total profit. The computation of oil production is an important work of oil fields’ production management. It has an instructional significance for the well yield accurately and timely metering, controlling reservoir on the situation, the development of production programs. Whether pouring into the oil viscosity reducer in the mining process, or in the measurement of oil and transportation process, the flow of oil is required for some of the accurate measurement and control. Therefore, according to the practical and particular requirements, this issue is through the current number of related areas of analysis and research, designed a control system based on AT89C51 microcontroller. The main contents of this issue is flow detection, mainly by the traffic flow information collected by sensors, and then through the AD converter continuously converting analog signal discretization to pass SCM, SCMs software system under the control of settings and according to pre- control requirements expected by stepper motor to precisely control the valve opening to achieve precise control of flow. Among them, the hardware circuit of the lap is the focus of this design, control system software design is the core of this issue. Hardware part which is using AT89C51 microcontroller and external EPROM memory expansion to constitute the main part of the SCM control system. By electromagnetic flow sensor, AD converter inputs, th