- 1、本文档被系统程序自动判定探测到侵权嫌疑,本站暂时做下架处理。
- 2、如果您确认为侵权,可联系本站左侧在线QQ客服请求删除。我们会保证在24小时内做出处理,应急电话:400-050-0827。
- 3、此文档由网友上传,因疑似侵权的原因,本站不提供该文档下载,只提供部分内容试读。如果您是出版社/作者,看到后可认领文档,您也可以联系本站进行批量认领。
查看更多
××××××型
甚高频无线电装置(级DSC)
型式试验大纲
×××科技有限公司
2012-12
目录
1、型式试验依据
2、型式试验项目
3、型式试验方法及要求
操作检查
性能试验
一般性能要求
性能试验条件
性能试验方法及要求
电源试验
环境条件试验
电磁兼容性试验
特殊试验
人身安全试验
型式试验依据:
IMO A.803(19) Performance standards for shipborne VHF radio installations capable of voice communication and digital selective calling
MSC.68(68) Adoption of amendments to performance standards for shipborne radiocommunication equipment
IEC 61097-3(1994) Global maritime distress and safety system (GMDSS) – Part 3: Digital selective calling (DSC) equipment - Operational and performance requirements, methods of testing and required testing results
IEC 61097-7(1996) Global maritime distress and safety system (GMDSS) – Part 7: Shipborne VHF radiotelephone transmitter and receiver - Operational and performance requirements, methods of testing and required test results
IEC 61097-8(1998) Global maritime distress and safety system (GMDSS) – Part 8: Shipborne watchkeeping receivers for the reception of digital selective calling (DSC) in the maritime MF, MF/HF and VHF bands - Operational and performance requirements, methods of testing and required test results
IEC 60945(2002) Maritime navigation and radiocommunication equipment and systems - General requirements -Mefhods of testing and required test results
ITU-R M.493-11 Digital selective-calling system for use in the
(与A类船有关的要求) maritime mobile service (concerning classA)
中国海事局 《国内航行海船法定检验技术规则》(2004)及其2006年修改通报-仅适用于300总吨以下的国内海上航行货船
中国海事局 《内河船舶法定检验技术规则》
2、型式试验项目:
所属设备类型:室内设备
型式试验项目
试验分类 试验项目 试验依据 一般试验 操作检查 IEC 60945 6.1~6.4 性能试验 IEC 61097-3
IEC 61097-7
IEC 61097-8 电源试验 电源最大稳态波动 IEC 60945 7.1,5.2.2 电源异常 IEC 60945 7.2,5.2.3 环境条件试验 干热 IEC 60945 8.2 湿热 IEC 60945 8.3 低温 I
您可能关注的文档
最近下载
知传链电子书
- 【练习10-8】:绘制1—1建筑剖面图,如图10-38所示。绘图比例为1︰100,采用A2幅面图框。.pdf
- 【练习10-7】:绘制建筑立面图,如图10-30所示。绘图比例为1︰100,采用A2幅面图框。为使图形简洁,图中省略了一些标注。.pdf
- 【练习10-3】:绘制建筑物首层平面图,如图10-17所示。绘图比例为1︰100,采用A2幅面图框。为使图形简洁,图中仅标出了总体尺寸、轴线间距尺寸及部分细节尺寸。.pdf
- 【练习10-2】:绘制建筑物标准层平面图,如图10-8所示。绘图比例为1︰100,采用A2幅面图框。为使图形简洁,图中仅标出了总体尺寸、轴线间距尺寸及部分细节尺寸。.pdf
- 习题.pdf
- 习题.pdf
- 习题.pdf
- 13.2 实训内容与步骤.pdf
- 12.2 实训内容与步骤.pdf
- 11.2 实训的内容与步骤.pdf
文档评论(0)