part1unit11讲解.pptVIP

In thread cutting operations, the workpiece can either be held in the chuck or mounted between the two lathe centers for relatively long workpieces. The form of the tool used must exactly coincide with the profile of the thread to be cut, i.e., triangular tools must be used for triangular threads, and so on. 在螺纹切削作业中，工件既能支撑于卡盘中，对相对较长的工件也能安装在两个车床顶尖之间。使用的刀具外形必须正好与要切削螺纹的轮廓一致，即三角形刀具必须用于三角形螺纹等等。 Knurling. Knurling is mainly a forming operation in which no chips are produced. It involves pressing two hardened rolls with rough filelike surfaces against the rotating workpiece to cause plastic deformation of the workpiece metal. 滚花：滚花主要是一种不产生切屑的成型操作。它使用两个带有粗锉式表面的淬火滚轮压在旋转的工件上使工件金属产生塑性变形。 Knurling is carried out to produce rough, cylindrical (or conical) surfaces, which are usually used as handles. Sometimes, surfaces are knurled just for the sake of decoration; there are different types of patterns of knurls from which to choose. 滚花用于生成粗糙的圆柱(或圆锥)面，通常用来作手柄。有时表面滚花只为装饰之故；有不同的滚花图案类型可供选择。 Cutting Speeds and Feed切削速度和进给 The cutting speed, which is usually given in surface feet per minute (SFM), is the number of feet traveled in the circumferential direction by a given point on the surface (being cut) of the workpiece in 1 minute. 切削速度，通常用每分钟表面英尺给出，就是一分钟内工件(被切削)表面给定点在圆周方向上行进的英尺数。 The relationship between the surface speed and rpm can be given by the following equation: SFM=πDN Where D=the diameter of the workpiece in feet N=the rpm 表面速度与转速之间的关系可以用下式给出： SFM=πDN 式中 D=用英尺表示的工件直径 N=转速 The surface cutting speed is dependant primarily upon the material being machined as well as the material of the cutting tool and can be obtained from handbooks, information provided by cutting tool manufacturers, and the like. 表面切削速度主要由被切削材料和切削刀具材料决定，可以从手册、切削刀具生产商提供的资料及类似的东西上查取。 Generally, the SFM is taken as 100 when machining cold-rolled or mild steel, as 50 when machining tougher metals, and as 200 when machining softer mat