《1 Component Casting》.pdfVIP

1 Component Casting 1.1 Introduction 1 1.1.2 Industrial Component Casting Processes 1.1.1 History of Casting 1 As a preparation for a casting process the metal is initially 1.1.2 Industrial Component Casting Processes 1 rendered molten in an oven. The melt is transferred to a so- 1.2 Casting of Components 1 called ladle, which is a metal container lined on the inside 1.2.1 Production of Moulds 1 with fireproof brick. The melt will then solidify for further 1.2.2 Metal Melt Pressure on Moulds and Cores 4 refining in the production chain. This is performed by trans- 1.2.3 Casting in Nonrecurrent Moulds 5 ferring the melt from the ladle into a mould of sand or a 1.2.4 Casting in Permanent Moulds 8 water-chilled, so-called chill-mould of metal. The metal 1.2.5 Thixomoulding 11 melt is then allowed to solidify in the mould or chill-mould. This chapter is a review of the most common and most important industrial processes of component casting. The 1.1 INTRODUCTION