CodeDistributionUnit-HoneywellVideoSystems.docVIP

Section 00000 Security Access and Surveillance ADEMCO VIDEO CODE DISTRIBUTION UNIT PART 1 – GENERAL The intent of this document is to specify the minimum criteria for the design, supply, installation, and commissioning of the Code Distribution Unit. SUMMARY The cost effective Code Distribution Unit shall combine code distribution, code merging, and code conversion functions in one easy to install unit. REFERENCES Conformity for Europe (CE) Federal Communications Commission (FCC) DEFINITIONS No Substitutes: The exact make and model number identified in this specification shall be provided without exception. Or Equal: Any item may be substituted for the specified item provided that in every technical sense, the substituted item provides the same or better capability and functionality. Or Approved Equal: A substitute for the specified item may be offered for approval by the Owner. The proposed substitution must, in every technical sense, provide the same or better capability and functionality as the specified item. Such requests for approval shall be submitted in accordance with the provisions of PART 1.05 – SUBMITTALS, and must be obtained within the time frames outlined. SYSTEM DESCRIPTION The cost effective Code Distribution Unit shall combine code distribution, code merging, and code conversion functions in one easy to install unit. SUBMITTALS General: Submittals shall be made in accordance with the Conditions of the Contract and Submittal Procedures Section. Shop Drawings and Schematics: Shall depict the Code Distribution Unit in final proposed “as built” configuration. The following must be provided: Connection diagrams for interfacing equipment. List of connected equipment. Locations for all major equipment components to be installed under this specification. Product Data: The following shall be provided: Technical data sheets. A complete set of instruction manuals. Quality Assurance Submittals: The following shall be submitted: Checkout Report: Th