Clickhere.docVIP

ASE Test Correlation Chart Electrical/Electronic Systems (A6) A. General Electrical/Electronic System Diagnosis (13 questions) Task /Textbook /Page No. Check electrical circuits with a test light; determine needed repairs. / 105 Check voltages and voltage drops in electrical/electronic circuits; interpret readings and determine needed repairs. / 84 Check current flow in electrical/electronic circuits and components; interpret readings and determine needed repairs. / 107–111 Check continuity and resistances in electrical/electronic circuits and components; interpret readings and determine needed repairs. / 106 Check electronic circuit waveforms; interpret readings and determine needed repairs. / 132–136 Use scan-tool data to diagnose electronic systems; interpret readings and determine needed repairs. / 467–468 Check electrical/electronic circuits with appropriate jumper wires; determine needed repairs. / 118 Find shorts, grounds, opens, and resistance problems in electrical/electronic circuits; determine needed repairs. / 164–168 Measure and diagnose the cause(s) of abnormal key-off battery drain (parasitic draw); determine needed repairs. / 240 Inspect, test, and replace fusible links, circuit breakers, fuses, diodes, and current limiting devices. / 145–149 Read and interpret electrical schematic diagrams and symbols. / 156–162 B. Battery Diagnosis and Service (4 questions) Task /Textbook /Page No. Perform battery state-of-charge test; determine needed service. / 234–236 Perform battery capacity (load, high-rate discharge) test; determine needed service. / 236 Maintain or restore electronic memory functions. / 241–242 Inspect, clean, fill, or replace battery. / 233 Perform slow/fast battery charge in accordance with manufacturer’s recommendations. / 238 Inspect, clean, and repair or replace battery cables, connectors, clamps, and holddowns. / 233 Jump start a vehicle with jumper cables and a booster battery or auxiliary power supply. / 240 C. Starting System Diag