适用小型饮料业的定量杯式灌装机说明书NJ.docVIP

摘要 随着人们对包装的不断重视，对包装要求的不断提高，人们开始把目光投向了包装机械行业。然而，我国的包装机械还处于刚起步的状态，包装机械的品种不齐全，自动化程度不高 液体物料的灌装, 首先要解决定量问题。液体物料的定量方法可分为三类:即按重量定量、体积定量和控制液位定量,按重量定量,定量精度较高,但需要一套称重装置,从而使定量机构的结构复杂、成本高、定量速度低,目前很少采用;后两种定量方法, 定量精度一般, 但结构简单、速度高。目前的灌装机供料机构基本采用体积定量和控制液位定量。 本次毕业设计适用小型饮料业的定量杯式灌装机。我首先针对目前的发展状况提出了一种总体设计方案，接着对灌装机进行总体布局设计、典型零件的结构设计与校核以及对轴的加工工艺的概述，最后分析了定量杯式灌装机的经济效益。 关键字：定量杯，灌装，液体物料 Abstract Along with people’s continuously valuing packaging and the request on packaging continuously raising, people start to turn their concern to packaging machine profession. However, the packaging machine of our country is still placed in just the appearance of start and packaging machine species are not well-found. For the filling of liquid materials,tht first we should solve the question of quantitative. The quantitative of liquid materials can be divided into three kinds: weight quantitative, volume quantitative,control the level of liquid quantitative. Quantitative precision of weight quantitative is higher, but it need a set of weight device,so the system will spend more and be complex ,now there are almost no people use it. Quantitative precision of The posterior two quantitative methods is normal, but the structure is simple and have high speed. At preset feeding mechanism of filling machine is usually use volume quantitative and control the level of liquid quantitative. In this graduation design, basing on the existing machine, we design a kind of continuous mode filling machine which is suitable in the small beverage industry。I first propose a plan according to the present development condition. and then carry on the blister packaging total layout design and typical parts structural design and the outlines of the axis machining process, finally analyzed the economic performance of measuring cup filling machine。 Keywords: measuring cup filling liquid material 目录 第一章 绪论 1 1.1 研究的背景和意义 1 1.1.1 研究的背景 1 1.1.2 研究的意义 1 1.2 定量杯式灌装机简介 2 1.3 本课题研究的主要内容 2 1.4 定量杯式灌装机发展趋势 2 第二章 定量杯式灌装机总体设计