《3.创建Project及定义变量》.doc

3.创建Project及定义变量 Practice Creation of application logic Create a new project Creation of a new RS project Refer 2.2 Definition of RS Projects of IM 32S04B10-01E Engineering Reference to create a new RS Project. Creation of a new SCS project Refer 3.1 Creation of New SCS projects of IM 32S04B10-01E Engineering Reference to create a new SCS project. Setting an SCS project Folder Destination folder : C:\RS-Projects\ Name : SCS0102 Comment : (any) Template : SCS_Default_Target Setting SCS Project Attributes Station Type : SSC10D-S Domain Number : 1 Station Number : 2 Component Number : (any) Setting a Resource Name : SCS0102 Comment : (any) Resource Number : 102 Cycle Timing : 100(ms) (4) Setting a configuration Name : SCS0102 Comment : (any) (5) Setting an IP Address IP Address : 172.16.1.2 (6) Setting SCS Constants Interval of repeated warning alarms : (default) Time synchronization method : (default) Scan period for external communication function : (default) Word reversal : (default) 1.3 Set security of SCS project databases Refer 4. Security of SCS Project Databases of IM 32S04B10-01E Engineering Reference to set SCS project security on the Project Properties dialogue Password: SCS0102 Close the SCS Manager and re-open the SCS Manager then check the SCS project security. 2. Definitions of Inputs/Outputs Refer 5 Definitions of Inputs/Outputs of IM 32S04B10-01E Engineering Reference to define Inputs/Outputs, I/O wiring and I/O parameters. 2.1 Definitions of input/output variables Define following input/output variables using Dictionary View. 1) Variables for digital inputs 2) Variables for digital outputs 3) Variables for analog inputs 2.2 Definitions of input/output modules Define input/output modules using I/O Wiring View and specify the mounting positions (node number and slot number) and redundancy as following configuration. 　 2.3 Wiring of channels and input/output variables Use I/O Wiring View to associate the