《Vibration dynamic Analysis_cours_Ansys》.pdfVIP

Course in ANSYS Day 5 Lesson 13. Vibration/dynamic Analysis Vibration/dynamic Analysis Outline for Course in ANSYS: Day 1 Lesson 1. Introduction to ANSYS Lesson 2. Basics Lesson 3. Solution phases Day 2 Lesson 4. Modeling Day 3 Lesson 5. Material Lesson 6. Loading Lesson 7. Solution Day 4 Lesson 8. Structural analysis Lesson 9. Postprocessing Lesson 10. Constraint equations Lesson 11. Parameters Lesson 12. Macros Day 5 Lesson 13. Vibration/dynamic analysis Lesson 13. Vibration/dynamic analysis Lesson 14. Thermal Lesson 13 2 1 Vibration/dynamic Analysis Programme for Lesson: • Modal analysis (MA) – MA – Steps – MA – Input – MA – ExpansionPass – MA – Analysis Options – MA – Mode extraction method – MA – Options – MA – Define Loads – MA – Load Step Options – MA – General Postprocessing • Harmonic response analysis (HRA) – HRA – Steps – HRA – Loads – HRA – Input – HRA – Load Step Options – HRA – Freq and Substps – HRA – Solution options • Transient dynamic analysis (TDA) – TDA – Steps – TDA – Solution Methods – TDA – Analysis options – TDA – Solution Controls • Spectrum analysis (SA) – Steps in a Single-Point Response Spectrum (SPRS) Analysis – Steps in Random Vibration (PSD) Analysis Lesson 13 3 Modal analysis (MA) • You use modal analysis to determine the vibration characteristics (