juniper私有属性.docVIP

Attribute Number Attribute Name Description Value Dynamic CoASupport 26-1 Virtual-Router Client logical system:routing instance name. Allowed only from AAA server for “default” logical system:routing instance. When this VSA is not included in the subscriber profile, the routing instance assigned to the subscriber—the one in which the subscriber session comes up—varies by subscriber type. For DHCP and PPPoE subscribers, it is the default routing instance. For L2TP tunnel subscribers, it is the routing instance in which the tunnel resides, whether default or non-default. If the tunnel routing instance is not default and you want the L2TP session to be in the default routing instance, you must use the Virtual-Router VSA to set the desired routing instance. string: logical system:routing instance No 26-4 Primary-DNS Client DNS address negotiated during IPCP. integer: 4-byte primary-dns-address No 26-5 Secondary-DNS Client DNS address negotiated during IPCP integer: 4-byte secondary-dns-address No 26-6 Primary-WINS Client WINS (NBNS) address negotiated during IPCP. integer: 4-byte primary-wins-address No 26-7 Secondary-WINS Client WINS (NBNS) address negotiated during IPCP. integer: 4-byte secondary-wins-address No 26-8 Tunnel-Virtual-Router Virtual router name for tunnel connection. string: tunnel-virtual-router No 26-9 Tunnel-Password Tunnel password in cleartext. Do not use both this VSA and the standard RADIUS attribute Tunnel-Password [69]. The standard attribute is recommended because the password is encrypted when that attribute is used. string: tunnel-password No 26-10 Ingress-Policy-Name Input policy name to apply to client interface. string: input-policy-name Yes 26-11 Egress-Policy-Name Output policy name to apply to client interface. string: output-policy-name Yes 26-23 IGMP-Enable Whether IGMP is enabled or disabled on a client interface. integer: 0=disable 1=enable Yes 26-25 Redirect-VRouter-Name Client logical system:routing instance name in