新奥燃气控股集团Conn_DevMan_Scen_Overview_EN_US.pptVIP

SAP AG 2005, Scenario Overview: Connection Device Management/ * SAP Best Practices for Water UtilitiesScenario Overview: Connection Device Management Connection Device Management Connection Device Management covers processes that keep up to date the equipment, the work orders, and service orders. The main processes covered by this Best Practices Scenario are: Good Receipt of Meters Connection Service Work Periodic Device Replacement Installation Processes for Meters Hydrant inspections Large meter service Hydrant billing Process overview – Goods Receipt of Meters The objective of this process is to receive meters into inventory and make them ready for installation in the field First meters are received into the inventory. Meters are then moved to a truck, either serialized or unserialized. Process flow: Receive new Meters on pallets Perform goods Movement Into inventory Issue meters To trucks Track meters ready to move ‘into the ground’ Process overview – Connection Service Work The objective is create, plan and execute work that needs to be performed on meters or Hydrants. The service order or notification is created from the relevant object. The relevant orders is selected from a list of possible orders. If an appointment is required, then this is made. The order is scheduled and executed. Process flow: Request for Work received Select type Of problem If appointment needed, Then schedule Schedule Order Release order To the field Process overview – Periodic Device Replacement The objective is to select, schedule and update status for meters that are due for periodic replacement. All meters due for periodic replacement are selected (no sampling is used). End when meter is back in the meter shop, where the test of the meter is performed. Process flow: Create Replacement list Select subset Of meters To be worked Replace meters Meter returns To meter shop For testing Process overview – Installation Processes for Meters This scenario covers instal