采矿工程毕业设计（论文）-田陈煤矿1. 2 Mta新井设计【全套图纸】.doc

摘 要 本设计包括三个部分：一般部分、专题部分和翻译部分。 一般部分为1. 2 Mt/a新井设计。一般部分共包括10章：1.矿区概述及井田地质特征2.井田境界和储量3.矿井工作制度及设计生产能力、服务年限4.井田开拓5.准备方式-区巷道布置6.采煤方法7.井下运输8.矿井提升9.矿井通风与安全技术10.矿井技术经济指标。 煤矿位于，交通甚为便利。°，平均厚度5.0 m。井田地质条件较为简单。 矿井工业储量为t，可采储量万t矿井服务年限a。矿井正常涌水量为m3/h，最大涌水量为m3/h。矿井瓦斯涌出量m3/t，瓦斯矿井。 矿井采用立井单水平上下山开采。采用胶带运输机运煤，辅助运输采用。矿井通风方式为。 矿井年工作日为30 d，工作制度为制。 专题部分题目是。 翻译部分Surrounding rock deformation and its controlling technology gob-side entry at isolated island coal face。 关键词：；；区；；中央并列 全套图纸，加153893706 ABSTRACT This design includes three parts: the general part, special subject part and translation part. The general part is a new design of Tian Chen mine. This design includes ten chapters: 1.An outline of the mine field geology; 2.Boundary and the reserves of mine; 3.The service life and working system of mine; 4.Development of mine; 5.The layout of mining area; 6.The method used in coal mining; 7. Transportation of the underground; 8.The lifting of the mine; 9. The ventilation and the safety operation of the mine; 10.The basic economic and technical norms. Tian Chen mine locates at the south of TengZhou, 18 km away from the center of the town. And it has convenience transportations. Minefield has a length of 6.8 km in the south and north direction while a width of 3.3 km in the east and west direction on average. The total area is approximately 22.08 km2. The main coal seam in the mine is only one, which is the 3# coal seam. The average angle is 8 degree, while the thickness is about 5.0 m. The minefield geological condition is simple. The proved reserves of the minefield are 151.9 million tons. The recoverable reserves are 103.71 million tons. The designed productive capacity is 1.2 million tons per year. The service life is 66.4 years. The normal flow of the mine is 373 m3 per hour and the max flow of the mine is 620 m3 per hour. The Relative gas discharge quantity is 2 m3 per ton. Thus it is Low gaseous mine. The coal dust of the mine has explosion hazard. And the coal seam has spontaneous combus