圆柱齿轮齿厚圆柱测量M值及公法线长度的计算机算法.pdfVIP

第29卷 增刊 光电工程 Vol.29, Sup 2002年12月 Opto-Electronic Engineering Dec, 2002 文章编号：1003-501X(2002)Sup-0117-03 圆柱齿轮齿厚圆柱测量M 值及 公法线长度的计算机算法 江 姬 嫔 （中国科学院光电技术研究所，四川成都 610209 ） 摘要：介绍一种适合各种渐开线圆柱齿轮齿厚圆柱测量M 值及公法线长度的计算程序。根据圆柱 齿轮测量的相关计算公式，采用数值逼近法编程近似计算出测量尺寸，计算精度可根 据需要选 取，操作简单、快捷，结果准确，大大简化了非标齿轮齿厚圆柱测量M 值及公法线长度复杂的手 工计算，是非标齿轮制造检测过程中非常实用的计算程序。 关键词：齿轮参数测量；圆柱齿轮；圆柱测量；计算机辅助检测 中图分类号：TG86 文献标识码：A Computer algorithm for measuring span between two cylinders in cylindrical gear thickness and common normal length measurement JIANG Ji-pin (Institute of Optics and Electronics, Chinese Academy of Sciences, Chengdu 610209, China) Abstract: A computer program that is suitable for measurement of span between two cylinders in cylindrical gear thickness and common normal length of various kinds of involute cylindrical gears. The measured sizes can be approximately calculated with digital approximation method according to the correlative calculation formula for cylindrical gear measurement. The calculation accuracy can be selected according to the demands. Operating is simple, quick and the results are accurate, thus greatly simplifies the complex manual calculation in span measurement between two ex-circles in cylindrical gear thickness and common normal length and it is a very practical calculation program in detection process for non-standard gear manufacturing. Key words: Gear tooth parameter measurement; Cylindrical